Sony CBK-HD01 Maintenance Manual page 113

SOURCE SEL Display (Setting to make the front microphone monaural or stereo)
O25 SOURCE SEL
FRONT MIC SELECT: STREO
REC VIDEO SOURCE:
EXT VIDEO SOURCE: HDSDI
WIDE MODE(EXT)
SETUP REMOVE
Item
FRONT MIC SELECT
REC VIDEO SOURCE *1
*1
EXT VIDEO SOURCE
WIDE MODE(EXT) *1
SETUP REMOVE *2
*1 : Displayed only when the CBK-HD01 or CBK-SC02 option board is installed.
*2 : Displayed only when COUNTRY is set to "NTSC(J)AREA" or "NTSC AREA" and the CBK-SC02 option board is installed.
UMID SET Display (Setting the UMID)
O26 UMID SET
COUNTRY CODE
ORGANIZATION
USER CODE
TIME ZONE :00
Item Setting
COUNTRY CODE 4 characters (alphanumeric characters)
ORGANIZATION 4 characters (alphanumeric characters)
USER CODE 4 characters (alphanumeric characters)
TIME ZONE 00 to 3F
PDW-700/V1 (E)
TOP
CAM
: AUTO
: 7.5%
Setting Function
MONO/STREO Selects MONO/STEREO when stereo microphone is connected
CAM/EXT Switches the recording target video between the video shot by
the camera and the video input from an external device (VBS or
SD-SDI/HD-SDI)
VBS/HDSDI/SDSDI Selects input signal to be recorded by this equipment, among
the input signals supplied from external equipment when EXT is
selected by REC VIDEO SOURCE
AUTO/16:9 When the input signal is SD, select the method that determines
whether the signal is treated as a wide signal
AUTO : When wide picture information is detected in the input
16:9 :
0.0%/7.5% Selects whether to modify the setup level of input video signals
7.5% : Remove the setup (Select when signals with 7.5% setup
are input)
0.0% : Do not remove the setup (Select when signals without
setup are input)
TOP
:
:
:
:+00:00
signal, treat the signal as a wide signal and set the
up-converter operating mode to squeeze mode. Record
wide picture information when recording SD. When
wide picture information is not detected, set the
upconverter operating mode to edge crop mode and do
not record wide picture information
Always treat the signal as a wide signal and set the
upconverter operating mode to squeeze mode. Record
wide picture information when recording SD
Function
Setting the country code
Setting the organization code
Setting the user code
Setting TIME ZONE (time difference)
4-23