Sony CBK-HD01 Maintenance Manual page 137

CAM CONFIG 1 Display (Setting-1 on camcorder)
M12 CAM CONFIG 1
REC TALLY BLINK :
REC START BEEP
SUB LCD MODE SEL: TIMER
SUB LCD TIMER
HDSDI REMOTE I/F:
PROAV DISPLAY
MIXED RECORDING : DSABL
SINGLE CLIP MODE:
PB POSITION
Item Setting
REC TALLY BLINK OFF/ON
REC START BEEP OFF/ON
SUB LCD MODEL SEL TIMER/OFF/CONT
SUB LCD TIMER 1H/3H/8H
HDSDI REMOTE I/F OFF/CHARA/G-TLY/
R-TLY
PROAV DISPLAY DSABL/ENABL
MIXED RECORDING DSABL/ENABL
SINGLE CLIP MODE OFF/ON
PB POSITION KEEP/TOP
*1 : SDI OUT 1 SELECT or SDI OUT 2 SELECT in the OUTPUT 1 page of the OPERATION menu must be set to HDSDI.
*2 : The details of the frame frequency groups are shown below.
Frame frequency
59.94 Hz
50 Hz
23.98 Hz
PDW-700/V1 (E)
TOP
ON
: OFF
: 1H
OFF
: DSABL
OFF
: KEEP
Function
Turns ON/OFF the tally blinking at the event of BATTERY BEFORE END/DISC
BEFORE END
Turns ON/OFF the beep sound at REC START/STOP
Sets the time counter display on the LCD after the power supply is turned off
TIMER : Display is terminated after the elapse of time which is specified in the
OFF :
CONT : Displayed
Specifies the time to terminate the display of time counter after the power-off,
when TIMER was set in the above SUB LCD MODEL SEL (H : hour)
Selects whether to use the function that enables recording control from this unit
of an external device connected to the SDI OUT 1/2 connectors (HDSDI output)
of this unit.
is recording
OFF :
CHARA : Use the function, and indicate by the controlling external device
G-TLY : Use the function, and indicate by the TALLY indicator in the viewfinder
R-TLY : Use the function, and indicate by the REC (recording, red tally) indicator
Specifies whether to display the PROAV folder when this unit is accessed by a
FAM/FTP connection
DSABL : Do not display
ENABL : Display
Turns ON/OFF the function that enables recording and saving of the clips having
the different recording formats to the same disc only when they belong to the
same frame frequency group
Selects the clip for the playback operation
ON : Selects only the currently selected clip for the playback operation
OFF : Selects all clips stored on the disc for the playback operation
Specifies the playback start position of the clip or sub clip when switching
between the clip playback screen and the clip list playback screen
KEEP : Resumes playback at the previous stop position
TOP : Starts playback from the top clip or from the top frame of the top sub clip
System frequency
59.94P, 59.94i, 29.97P
50P, 50i, 25P
23.98P
item SUB LCD TIMER below
No displayed
*1
Also selects the indication that shows whether the external device
Do not use the remote recording control function
indicator in the viewfinder
in the viewfinder
*2
4-47