Lcd Backlight And Lcd Panel - Sony CBK-HD01 Maintenance Manual

1-8-3. LCD Backlight and LCD Panel

1. Remove the LCD block. (Refer to Section 1-8-1.)
2. Remove the four screws a (M2 x 3) , and remove the
LCD cover.
3. Remove the two screws b (M2 x 3) .
4. Disconnect the harness from the connector (CN1) on
the PD-118 board, and remove the LCD hinge.
5. Disconnect the flexible card wire of the LCD panel
from the connector on the PD-118 board.
6. Release the six claws on the LCD bezel to remove the
LCD frame.
7. Remove the LCD panel from the LCD bezel.
8. Disconnect the flexible card wire of the LCD backlight
from the connector (CN3) on the PD-118 board.
9. Remove the two screws c (M2 x 3) .
10. Release the hooks on the PD-118 board from the LCD
backlight to remove the PD-118 board.
11. Remove the three screws d (M1.7 x 2.5) .
12. Release the claws on the LCD backlight from the LCD
frame to remove the LCD backlight.
1-44
a
b
Harness
LCD hinge
PD-118 board
LCD frame
LCD panel
LCD bezel
Claws
PD-118 board
CN3
c
Hooks
LCD frame
LCD backlight
a
a
CN1
CN2
Claws
LCD frame
d
LCD backlight
Claws
PDW-700/V1 (E)