Sony CBK-HD01 Maintenance Manual page 99

Item
ASSIGN SW 1/3/4/RET
COLOR TEMP SW
ASSIGN SW 2
ZOOM SPEED
RETURN VIDEO
*1 : This does not appear if nothing is assigned in the Assign menu.
*2 : Even when the MARKER item is set to OFF on the MARKER page of the USER menu, the ASSIGN 1/3/4 switch allows you to display or not to display all
markers.
*3 : The optional CBK-SC02 Analog Composite Input Board is required for VBS signal input. The optional CBK-HD01 HD/SD SDI Input Board is required for
SD-SDI/HD-SDI signal input.
*4 : Video momentarily becomes black and audio is momentarily muted when the DIGITAL EXTENDER is switched ON/OFF.
POWER SAVE Display (Setting the POWER SAVE function)
O07 POWER SAVE
ETHERNET/USB
i.LINK(FAM)
REC AUDIO OUT
TEST OUT SAVE
Item
ETHERNET/USB
i.LINK(FAM) *
REC AUDIO OUT
TEST OUT SAVE
* : The unit must be restarted to enable changes to this setting.
PDW-700/V1 (E)
Setting
FOCUS MAG
*4
DIGITAL EXTENDER
CLIP CONT REC
*1
UA01 to UA10
OFF
FRONT MIC MONO/STEREO Assigns the function to switch stereo and monaural when the stereo
PICTURE CACHE ON/OFF
SUPER (VFDISP&MENU)
MARKER
REC VIDEO SOURCE
ZEBRA
FREEZE MIX
*4
DIGITAL EXTENDER
CLIP CONT REC
*1
UA01 to UA10
0 to 99
OFF/ON
TOP
: DSABL
: DSABL
: EE
: ON
Setting
DSABL/ENABL
DSABL/ENABL
EE/SAVE
OFF/ON
Function
Assigns the function that magnifies the central part of the viewfinder
picture, for easier focus adjustment
(This function does not affect recorded video or other signal output)
Assigns the function that electronically magnifies the central part of the
picture (All video output is magnified, including recorded video)
Clip continuous rec function ON/OFF
Assigns the items assigned in the ASSIGN SEL menu
Assigns no function
microphone is connected
Assigns the function to execute picture cache recording
Assigns the function of a switch to select mixing or no mixing of superimposed
viewfinder and menu text data into the video signals output from the SDI OUT
2 or TEST OUT connector, when SDI OUT 2 SUPER or TEST OUT SUPER
on the OUTPUT 1 page of the OPERATION menu are set to ON
Assigns the ON/OFF function to display all markers
Switches the recording target video between the video shot by the camera
and the video input from an external device (VBS or SD-SDI/HD-SDI)
Assigns the zebra pattern display function to the switch
Assigns the function that mixes a still picture (monochrome) and camera
video (color) (effective for framing shots)
Assigns the function that electronically magnifies the central part of the
picture (All video output is magnified, including recorded video)
Clip continuous rec function ON/OFF
Assigns the items assigned in the ASSIGN SEL menu
ZOOM SPEED function ON/OFF
RETURN VIDEO function ON/OFF
Function
Enables or disables the network connector and USB connector
Enables or disables the i.LINK connector (FAM function)
Puts the AUDIO OUT connector in EE or SAVE mode
Switches the TEST OUT connector power saving function on and off
ON : No signals are output if a cable is not connected
OFF : Signals are always output, regardless of whether a cable is
connected
*2
*3
4-9