Sony CBK-HD01 Maintenance Manual page 134

WRR SETTING Display (Setting on Wireless)
M09 WRR SETTING
WRR VALID CH SEL:
WRR CH SELECT
WRR DELAY COMP
TX1
TX1 AUDIO PEAK
TX1 INPUT LEVEL :
TX1 ATT LEVEL
TX1 LCF FREQ
TX1 SYSTEM DELAY:
Item
WRR VALID CH SEL
*2
WRR CH SELECT
*2
WRR DELAY COMP
*1, *2
TX*
*1, *2
TX* AUDIO PEAK
*1, *2
TX* INPUT LEVEL
*1, *2
TX* ATT LEVEL
*1, *2
TX* LCF FREQ
*1, *2
TX* SYSTEM DELAY
*1 : * indicates the channel number.
*2 : A setting for this item is required when the DWR-S01D Slot-In Digital Wireless Receiver is installed.
4-44
TOP
ALL
: TX1
: ON
: -
: PEAK
MIC
: 0dB
: 200Hz
AUTO
Setting Function
ALL/CH1 Selects whether to enable channels 1 and 2 of the
wireless receiver, or channel 1 only
ALL : Enable both channel 1 and 2
CH1 :Enable channel 1 only. Select this setting to use
TX1/TX2 Specifies the target channel for other items in this menu
TX1 : Channel 1
TX2 : Channel 2
OFF/ON Enables or disables the delay compensation function for
wireless audio input
OFF :Disables the function
ON : Enables the function (the audio in all EE output is
Displays the name of the transmitter whose signals are
-
being received on the channel selected by WRR CH
SELECT
PEAK Displays whether the AF level of the transmitter whose
signals are being received on the channel selected by
WRR CH SELECT is over the peak
MIC/LINE Displays whether the input level of the transmitter whose
signals are being received on the channel selected by
WRR CH SELECT is set to MIC or LINE
Sets the ATT level of the transmitter whose signals are
-
being received on the channel selected by WRR CH
SELECT (the permissible setting range may vary
depending on the transmitter device)
Sets the Low Cut Filter frequency of the transmitter
-
whose signals are being received on the channel
selected by WRR CH SELECT (the permissible setting
range may vary depending on the transmitter device)
AUTO/0.0 ms to 8.0 ms When WRR DELAY COMP is set to ON, sets the amount
of audio delay for the channel selected by WRR CH
SELECT
AUTO : Automatically adjusts the amount of delay so
0.0 ms to 8.0 ms :Sets the amount of anticipated cases
the wireless receiver as a monaural receiver
delayed by about 8 ms)
that the delay in the audio received from the
wireless receiver is zero
in several wireless systems are being
used over a device such as an audio
mixer
PDW-700/V1 (E)