Sony CBK-HD01 Maintenance Manual page 138

CAM CONFIG 2 Display (Setting-2 on camcorder)
M13 CAM CONFIG 2
TEST SAW SELECT :
COLOR BAR SELECT:
USER & ALL ONLY :
RM COMMON MEMORY:
RM REC START
SHT DISP MODE
AF MARKER SOURCE: ASPEC
RM F NO DISPLAY :
FAN CONTROL
FOCUS MAG SW
Item Setting
TEST SAW SELECT REC/SAW
COLOR BAR SELECT ARIB/100%/75%/SMPTE
USER & ALL ONLY OFF/ON
RM COMMON MEMORY OFF/ON
RM REC START RM/CAM/PARA
SHT DISP MODE SEC/DEG
*1
AF MARKER SOURCE SAFE/ASPEC/USER
RM F NO DISPLAY CTRL/RET
*2
FAN CONTROL AUTO/R.MIN/MIN
FOCUS MAG SW MTRY/ALT
*1 : Displayed only when AF DISPLAY is set to ON on SERVICE MENU.
*2 : The setting of this item is retained even after the power is turned off.
4-48
TOP
SAW
ARIB
OFF
OFF
: RM
: SEC
CTRL
: AUTO
: MTRY
Function
Selects the test signal
Selects the color bar type
Reference : The R GAIN and B GAIN value also change accordingly at the
Show only USER menu in the top menu
Selects whether or not to share settings for when a remote control unit is
connected and when the unit is used alone
When an remote control unit is connected, selects which recording start/stop
buttons are enabled
RM :
CAM :
PARA : Both
Selects shutter speed display (second or degree)
When the FUJINON PF lens (HA22x7.4BRD, HA13x4.5BRD) is connected,
selects which existing marker is enabled to display the AF detection window
ASPEC : Use ASPECT MARKER as the substitute
SAFE :
USER : Use USER BOX as the substitute (It is not displayed in the LCD/
Selects the method used to display IRIS F values on the MSU-900 or another
remote control unit
CTRL : Display on the basis of control value from the camera
RET:
Selects the control method of the cooling fan
AUTO : The cooling fan rotation is automatically controlled
R.MIN : The cooling fan runs at a low speed only during recording
MIN :
n
Regardless of the setting of this item, the cooling fan starts running at a high
speed if the internal temperature of the unit rises close to the point where an
alarm is issued.
Selects the operation when the FOCUS MAG function is assigned to the
ASSIGN switch
MTRY : Turns ON only as long as it is pressed
ALT :
same time.
Remote control unit
Camcorder
Use SAFETY ZONE as the substitute
VBS output)
(normal display method)
Display on the basis of position information from the lens
(same method as when AUTO IRIS is enabled)
(The fan stops rotating if the temperature inside the unit does not rise
due to the low temperature environment)
The cooling fan runs at a low speed (The fan stops rotating if the
temperature inside the unit does not rise due to the low temperature
environment)
Toggles between ON and OFF each time it is pressed
(Turns OFF automatically after 5 seconds have passed since ON)
PDW-700/V1 (E)