Sony CBK-HD01 Maintenance Manual page 160

MENU SET
S01 MENU SET
RE ROTATION REV :
RE SPEED
DIRECT VALUE
SERVICE RESET
FACTORY PRESET
Item Setting
RE ROTATION REV OFF/ON
RE SPEED 1/2/3
DIRECT VALUE OFF/DEC/HEX
SERVICE RESET Press the MENU knob
to execute this menu item
FACTORY PRESET Press the MENU knob
to execute this menu item
SP FUNC
S02 SP FUNC
GAIN DISP MODE
KNEE 2ND POINT
Item Setting
GAIN DISP MODE dB/ISO
KNEE 2ND POINT OFF/ON
4-70
TOP
OFF
: 2
: OFF
: EXEC
: EXEC
TOP
: dB
: ON
Function
Turns ON/OFF the function to invert the rotating direction of the
MENU knob
Sets the response speed of the MENU knob
OFF: The set value is displayed after conversion (in the range of
-99 to 99) (It returns to OFF when the main power is turned on)
DEC : The set value is displayed after being converted into a decimal
number (The variable range differs depending on the item)
HEX : The set value is displayed after being converted into a hexadecimal
number (The variable range differs depending on the item)
Resets the data in the SERVICE hierarchy
Refer to "5-2 Data Structure" for details of the hierarchical structure
Returns all of the settings to the default setting when shipped from the
factory (Excluding the black balance automatic adjustment value)
Function
Turns ON/OFF the function that sets the GAIN value in the ISO indication
ON: ISO indication
OFF: Decibel (dB) indication
n
Correspondence between the ISO and decibel (dB) indications is shown
below. Values in parenthesis indicate the decibel (dB) indication
400(-6)/570(-3)/800(0)/1100(3)/1600(6)/2300(9)/3200(12)/6400(18)
13000(24)/26000(50)/51000(36)/100000(42)
The setting whether or not to enable the knee 2nd point when
compressing a high luminance signal
ON : The knee 2nd point is enabled to allow operator to compress the
high luminance part in wide range
OFF : The knee 2nd point is disabled and only the knee 1st point is
enabled
1 (slow) → 3 (fast)
PDW-700/V1 (E)