Sony CBK-HD01 Maintenance Manual page 103

MARKER 1 Display (Setting the MARKER)
O12 MARKER 1
MARKER
CENTER
CENTER MARK
SAFETY ZONE
SAFETY AREA
ASPECT
ASPECT SELECT
ASPECT MASK
ASPECT MASK LVL :
100%MARKER
Item Setting
MARKER OFF/ON
CENTER OFF/ON
CENTER MARK 1/2/3/4
SAFETY ZONE OFF/ON
SAFETY AREA 80/90/92.5/95%
*2
ASPECT OFF/ON
*2
ASPECT SELECT 15 : 9/14 : 9/13 : 9/4 : 3/1.85/2.35
ASPECT MASK OFF/ON
*2 *3
(4 : 3)
*2
ASPECT MASK LVL 0 to 15
100% MARKER OFF/ON
*1 : The CENTER MARKER is displayed as shown below.
Setting 1
VF
screen
*2 : This item is ignored when the recording format is IMX50/40/30 or DVCAM and the aspect ratio is 4:3.
*3 : The ASPECT MASK item is for processing the signal to be output to the viewfinder. When R, G, or B is selected for the TEST OUT
SELECT item in the menu, the masked video signal is output to the TEST OUT connector.
ASPECT MASK is ignored for displays in the viewfinder when the following are true.
• TEST OUT SELECT on the OUTPUT 1 page is set to HD-Y, and a cable is connected to the TEST OUT connector
• TEST OUT SELECT on the OUTPUT 1 page is set to HD-Y, and TEST OUT SAVE on the POWER SAVE page is set to OFF
PDW-700/V1 (E)
TOP
: OFF
: OFF
: 3
: OFF
: 90%
: ON
: 4:3
: ON
12
: OFF
2
Function
Turns ON/OFF all the MARKER display functions
Turns ON/OFF the CENTER MARKER display
Selects the types of CENTER MARKER when the
above CENTER MARKER display is ON
Turns ON/OFF the SAFETY ZONE MARKER
display
Selects the ranges of the SAFETY ZONE
MARKER display (80%/90%/92.5%/95%)
Turns ON/OFF the ASPECT MARKER display
Selects the aspect ratio
Turns ON/OFF the function to darken the outside
of the specified aspect
Selects the darkness level of the outside of the
specified aspect when ASPECT MASK is ON
Selects the MARKER display function to display
the 100% (effective picture elements) area
3
*1
4
4-13