Sony CBK-HD01 Maintenance Manual page 143

AUTO SHADING Display (Automatic SHADING adjustment)
M21 AUTO SHADING
AUTO BLK SHADING:
RESET BLK SHD
TEST OUT SELECT :
MASTER GAIN(TMP):
Item
AUTO BLK SHADING
RESET BLK SHD
TEST OUT SELECT
MASTER GAIN(TMP)
APR Display (Detect compensation function)
M22 APR
APR
APR(SLS)
APR PRESET
Item
APR
*
APR (SLS)
APR PRESET
* : This does not appear when SYSTEM LINE is set to 720, SYSTEM FREQUENCY is set to 59.9P, and SCAN MODE is set to 23.9P.
PDW-700/V1 (E)
TOP
EXEC
: EXEC
VBS
0dB
Setting
_
_
VBS/Y/R/G/B/LCD
_6/_3/0/3/6/9/12/18/
24/30/36/42 dB
TOP
: EXEC
: EXEC
: EXEC
Setting
_
_
_
Function
Executes the auto black shading function
Clears black shading compensation values
Selects the video signal that is output from the TEST
OUT and the VBS/SDI OUT connector (Invalid when
the BARS signal is selected)
(The Y-signal becomes the VBS signal when VBS is
selected in the SD REAR BNC OUT of the OUTPUT
SEL display (of the OPERATION menu) and SD is
selected in the TEST OUT SELECT). The output
signal returns to the Y-signal without fail at power-on
Temporarily sets the master gain value
Function
Executes the defect compensation function
Suppresses white flecks in SLS (Slow Speed Shutter)
mode by executing the automatic pixel noise reduction
function
n
The execution time for this function is about 30 minutes.
More time may be required when temperatures inside
the unit are low.
Deletes white flecks data that was added by execution
of the APR and automatic black balance adjustment
functions
4-53