Sony CBK-HD01 Maintenance Manual page 124

SKIN DETAIL Display (Controlling DETAIL of specific color such as skin tone)
P10 SKIN DETAIL
SKIN DETAIL ALL :
SKIN DETECT
SKIN AREA IND
SKIN DTL SELECT :
SKIN DETAIL
SKIN DETAIL LVL :
SKIN DTL SAT
SKIN DTL HUE
SKIN DTL WIDTH
Item Setting
SKIN DETAIL ALL OFF/ON
SKIN DETECT Moves to color
detection page
SKIN AREA IND OFF/ON
SKIN DTL SELECT 1/2/3
SKIN DETAIL OFF/ON
SKIN DETAIL LVL (_99 to 99)
SKIN DTL SAT (_99 to 99)
SKIN DTL HUE 0 to 359
SKIN DTL WIDTH 0 to 359
4-34
TOP
OFF
: EXEC
: OFF
1
: ON
0
: 0
: 0
: 39
Function
Turns ON/OFF the skin detail function
Automatic color detection function
Move the cursor to the desired object color and press the
MENU knob. Then the SKIN DTL SAT. and the SKIN
DTL HUE will be set automatically
Turns ON/OFF the zebra display to the target area
Selects the skin detail BANK
(When BANK is switched, the lower 5 lines of display are
switched at the same time)
Turns ON/OFF skin detail CH1/2/3 individually
The ON/OFF settings can be set for each selection of
SKIN DTL SELECT above (three settings)
Sets the skin detail signal level
(Increasing this value increases the skin detail signal
amplitude)
This item can be set to each BANK (3 different settings) of
the above SKIN DTL SELECT
Sets the range of (saturation) of chroma signal in which
the skin detail signal is effective
This item can be set to each BANK (3 different settings) of
the above SKIN DTL SELECT
Sets the center phase of the chroma phase (HUE) in
which the skin detail functions (Unit : Degrees)
This item can be set to each BANK (3 different settings) of
the above SKIN DTL SELECT
Sets the width of the chroma phase (HUE) in which the
skin detail functions (Unit : Degrees)
This item can be set to each BANK (3 different settings) of
the above SKIN DTL SELECT
PDW-700/V1 (E)