9-2-6. Black Set Adjustment
Fixtures and Equipment:
HD waveform monitor
Preparation:
. Connect an HD waveform monitor of the HD-SDI to the
HDSDI OUT connector.
. Lens IRIS → CLOSE
. AUTO W/B BAL switch (front panel) → BLK
(Perform the automatic black balance adjustment.)
Adjustment Procedure:
1. On the menu, adjust as follows.
MENU: PAINT
PAGE: PAINT
ITEM: MASTER BLACK
A = 3 ± 1 IRE (NTSC)
Spec.:
A = 20 ± 7 mV (PAL)
9-8
A
PDW-700/V1 (E)