Cmos Battery; Fuse - Honeywell VX6 Reference Manual

70

CMOS Battery

The LXE VX6 has a permanent 190 mAh Lithium battery installed to maintain time, date and
CMOS setup information. The lithium battery is not user serviceable and should last five years
with normal use before it requires replacement.

Fuse

The VX6 uses a 100V, 10A time delay (slow blow), high current interrupting rating fuse that is
externally accessible and user replaceable. Should it need replacement, replace with same size,
rating and type of fuse – Littlefuse 0234010 or Optifuse MSC-10A (5x20mm).
TENT 5862393
Caution:
!
VX6 Reference Guide
CAUTION: For continues protection against risk of fire,
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
replace only with same type and rating of fuse.
OPERATION IS SUBJECT TO THE FOLLOWING TWO This Class A digital apparatus complies with
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL Canadian ICE-003.
ATTENTION: Pour ne pas compromette la preotection
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
Cet appareil num érique de la Classe A est
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
contre les risques d'incendie, remplacer par un fusible
confirme l à n orme NMB-003 du Canada
THAT MAY CAUSE UNDESIRED OPERATION.
de mmes types de mmes caractristques nominales. ê
AUDIO
INPUT:
12-80VDC
6A 72W
ETHERNET /
USB
T10A, 125V
1
Figure 2-44 Fuse Replacement
Fuse has voltage on it even when power is off. Always disconnect input power
before changing fuse.
ê é
2
3
Power Supply
1. Fuse
2. Twist in this
direction to
remove
3. Twist in this
direction to insert
E-EQ-VX6RG-F