Peap/Ms-Chap Authentication Configuration; Configuring The Peap/Ms-Chap Supplicant - Honeywell VX6 Reference Manual

Cisco Radio

PEAP/MS-CHAP Authentication Configuration

The Microsoft supplicant authenticates a user with the PEAP/MS-CHAP protocol. The Cisco
CAB file without Cisco PEAP must be used with PEAP/MS-CHAP. See "Installing Radio
Drivers", earlier in this chapter, for more information.

Configuring the PEAP/MS-CHAP Supplicant

With the radio parameters configured (see "Wireless Network Configuration", earlier in this
chapter) set the EAP type to PEAP as shown above.
If the EAP type box text is not exactly as shown see "Installing Radio Drivers", earlier in this
chapter, to change the radio cab file.
Click the Properties button.
When first configuring and authenticating, do not validate the server certificate. This allows the
user authentication to be tested. When that works, come back to this screen and validate the
server certificate.
E-EQ-VX6RG-F
Figure 5-43 PEAP/MSCHAP Wireless Network Properties
Figure 5-44 Authentication Settings
229
VX6 Reference Guide