Peap/Mschap - Honeywell VX6 Reference Manual

208

PEAP/MSCHAP

To use PEAP/MSCHAP, make sure the following profile options are used.
Please review "Sign-On vs. Stored Credentials" earlier in this chapter.
Click the Credentials button.
Enter these items as directed below.
VX6 Reference Guide
•
Enter the SSID of the Access Point assigned to this profile
•
Set EAP Type to PEAP-MSCHAP
•
Set Encryption to WPA TKIP
•
Set Auth Type to Open
Figure 5-17 PEAP/MSCHAP
•
No entries except the CA Certificate Filename are necessary for Sign-On Credentials
as the user will be prompted for the User Name and Password when connecting to
the network.
•
For Stored Credentials, User, Password and the CA Certificate Filename must be
entered.
Figure 5-18 PEAP/MSCHAP Credentials
Summit Radio
E-EQ-VX6RG-F