20
Bluetooth Beep and LED Indications
Beep Type from Bluetooth Device
Acknowledge label
Label rejected
Transmission error
Link successful
Link unsuccessful
LED on Bluetooth Device
Yellow LED blinks at 2 Hz
Off
Yellow LED blinks at 50 Hz
Yellow LED blinks at the same rate
as the paging beep (1 Hz)
Green LED blinks once a second
Upon startup, if the scanner sounds a long tone, this means the scanner has not passed its
automatic Selftest and has entered isolation mode. If the scanner is reset, the sequence is repeated.
Contact LXE Support for assistance.
VX6 Reference Guide
Behavior
1 beep
2 beeps at low frequency
Beep will sound high-low-high-low
Beep will sound low-medium-high
Beep will sound high-low-high-low
Behavior
Linking in progress
Disconnected or unlinked
Bluetooth transmission in progress
Paging
Disabled indication
Bluetooth
E-EQ-VX6RG-F