Barcode
Step 9: Code ID
Access:
If the Code ID is not stripped, the Code ID is added to the output buffer after the Prefix string (if
any).
The default is to enable Code ID stripping (the checkbox is enabled and the Code ID is not added
to the output buffer).
The Code ID is stripped from the barcode data for the Symbology selected from the pulldown list.
If 'All' is selected, the Code ID stripping is applied to all symbologies that have not been
previously customized.
E-EQ-VX6RG-F
Start | Settings | Control Panel | Scanner | Barcode | Symbology
Settings
Figure 4-18 Code ID Strip
171
VX6 Reference Guide