Pcmcia, Cf And Sd Slots; Pcmcia Slots; Figure 2-32 The Pcmcia And Ata Slots - Honeywell VX6 Reference Manual

PCMCIA, CF and SD Slots

PCMCIA, CF and SD Slots
The VX6 has two PCMCIA slots, one Compact Flash slot and one Secure Digital slot. The
PCMCIA slots are stacked on top of each other and located on the right hand side of the opening.
The PCMCIA slots support the Personal Computer Memory Card International Association
(PCMCIA) 2.1 standards. The upper slot is designated as Slot A and the lower slot is designated
as Slot B.
Slot A accepts Type I or II PCMCIA cards. If a radio card is used, it must be installed in Slot A to
prevent damage to the internal radio cables. LXE supports only Type II 2.4GHz Spread Spectrum
radios.
Slot B accepts Type I or II PCMCIA cards.
The PCMCIA slots may be disabled by the user. To enable or disable a PCMCIA slot, select
Start | Settings | Control Panel | PCMCIA icon.
The center slot is a Compact Flash slot, containing the CF ATA hard drive. This drive contains
the operating system and settings.
The left slot is used for Secure Digital (SD) memory cards.
SD
1

PCMCIA Slots

Slot A and B PCMCIA Card Management is handled by the Microsoft Windows CE operating
system. The PCMCIA cards are Plug and Play devices and can be "hot swapped". For more
details, refer to the Windows CE help screens or refer to the documentation delivered with the
PCMCIA card.
Note:
E-EQ-VX6RG-F
CF ATA PCMCIA A
PCMCIA B
2

Figure 2-32 The PCMCIA and ATA Slots

Although cards in the PCMCIA slot may be hot swapped, the VX6 is not environmentally
sealed while the access panel cover is removed to hot swap PCMCIA cards.
4
3
1. SD Card Slot
2. Compact Flash Hard
Drive
3. PCMCIA Slots
VX6 Reference Guide
59