Setting Eap/Tls Parameters - Honeywell VX6 Reference Manual

Cisco Radio
Make sure the private key is Present.
If it is not present, install the private key file.
If there is no user certificate refer to "User Certificates", earlier in this chapter, to acquire a user
certificate and private key file.

Setting EAP/TLS Parameters

With the radio parameters configured (see "Wireless Network Configuration") set the EAP type to
TLS as shown.
Click the Properties button.
E-EQ-VX6RG-F
Figure 5-67 EAP/TLS Configuration
Figure 5-68 Authentication Settings
241
VX6 Reference Guide