Honeywell VX6 Reference Manual page 338

318
Message
Unable to move desktop
Unable to move taskbar
Unhook taskbar wndproc failure
Unhook wndproc failure
Unhooking taskbar
Unhooking wndproc
WM_SIZE adjusted
X after Ctrl+L
Ret from password <#>
Decrypt data len <#>
Window handle to
enumwindows=%x
WM_WINDOWPOSCHG
adjusted=%x
VX6 Reference Guide
Explanation and/or corrective action
The desktop is moved when switching into user mode.
This prevents them from being visible if the application
is exited and restarted by the timer. This error does not
affect the screen mode switch; processing continues.
The taskbar is moved when switching into user mode.
This prevents them from being visible if the application
is exited and restarted by the timer. This error does not
affect the screen mode switch; processing continues.
AppLock could not remove its control of the taskbar.
This error does not affect AppLock processing
AppLock could not remove the hook that allows
monitoring of the application.
In administration mode, the taskbar should return to
normal operation, so AppLock's control of the taskbar
should be removed.
When the administrator leaves user mode, the device is
fully operational; therefore, AppLock must stop
monitoring the locked application.
This message denotes that AppLock has readjusted the
window size.
Processing the backdoor entry.
Return value from password dialog.
Length of decrypted password.
The window handle that is passed to the enumeration
function. This message can be used by engineering with
other development tools to trouble shoot application
lock failures.
Output the window size after it has been adjusted by
AppLock
AppLock Error Messages
Level
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_EX
LOG_EX
LOG_EX
LOG_EX
LOG_EX
LOG_EX
LOG_EX
E-EQ-VX6RG-F