Step 2: Reject Disabled Symbologies - Honeywell VX6 Reference Manual

162
Note:

Step 2: Reject Disabled Symbologies

Access:
When a Code ID has been selected, individual symbologies for the Code ID may be disabled.
Note:
By default, all symbologies are enabled. To disable a particular symbology, select the symbology
from the pulldown listing and uncheck the Enable box.
Note:
When a symbology is disabled, any incoming scanned barcode data of that symbology is rejected.
When a symbology is disabled, all other fields for that symbology are grayed out.
Note:
When None has been selected for Code ID, the Enable box cannot be unchecked (as this would
disable the reading of all barcodes).
VX6 Reference Guide
Symbology listing includes all Custom Code IDs. Select this option to enable
processing of barcodes with a custom Code ID.
UPC/EAN Codes only: The Code ID for supplemental barcodes is not stripped.
Start | Settings | Control Panel | Scanner | Barcode | Symbology
Settings
Figure 4-10 Enable / Disable Symbologies
Since the VX6 does not contain an internal scanner, this feature requires that the
external scanner be manually configured to enable/disable symbologies as desired. This
setting only affects the processing of barcode data, not the behavior of the external
scanner. Please refer to the scanner documentation to enable the Code ID.
The symbology is now shown with an asterisk (*) to indicate the default settings have
been modified for this symbology.
Because external scanner operation cannot be controlled by the VX6's scanner driver,
the scanner may still sound a "good scan" beep when scanning a disabled symbology.
However, the VX6 sounds a "bad scan" beep to indicate the barcode has been rejected.
Barcode
E-EQ-VX6RG-F