Connect; Start Ftp Server / Stop Ftp Server - Honeywell VX6 Reference Manual

Start Menu Program Options

Connect

Connect is used to initiate a hardwired connection to a host. Several pre-defined connect setups
are included in the factory setup:
The default connect setup is USB direct connect.
After a connect setup is selected, Start | Programs | Communication | Connect will start to
connect to a host. After this connection is made and an ActiveSync relationship established, the
ActiveSync menu item can be used to establish the connection over the radio link.
See Also: "Important Information – Cold Boot and Loss of Host Re-connection"

Start FTP Server / Stop FTP Server

These shortcuts call the Services Manager to start and stop the FTP server. The server defaults to
Off (for security) unless it is explicitly turned on from the menu.
2
The COM3 port is labeled "COM2/3".
E-EQ-VX6RG-F
•
COM1 direct connect at 57600 or 115200 baud
• 2
COM3 direct connect at 57600 or 115200 baud
•
USB direct connect
79
VX6 Reference Guide