Peap/ Gtc Authentication Configuration; Configuring The Peap / Gtc Supplicant - Honeywell VX6 Reference Manual

232

PEAP/ GTC Authentication Configuration

The Microsoft supplicant authenticates a user with the PEAP/GTC protocol.

Configuring the PEAP / GTC Supplicant

With the radio parameters configured set the EAP type to Cisco PEAP as shown below.
If the EAP type box text is not exactly as shown see "Installing Radio Drivers", earlier in this
chapter, to change the radio cab file.
Click the Properties button.
When first configuring and authenticating, do not validate the server certificate. This allows the
user authentication to be tested. When user authentication is successful, return to this screen and
validate the server certificate as shown later in this section.
Check the Always try to resume secure session box.
VX6 Reference Guide
Figure 5-49 PEAP/GTC Wireless Network Properties
Figure 5-50 PEAP Properties
Cisco Radio
E-EQ-VX6RG-F