Pc Connection - Honeywell VX6 Reference Manual

Control Panel Options

PC Connection

Access:
Control the connection between the VX6 and a nearby desktop/laptop computer.
Tap the Change button to adjust the settings and click the OK button to save the changes. The
changes take effect immediately.
Unchecking the "Allow connection with ....." disables ActiveSync.
Change ....
Clicking Change lists configured ActiveSync connections. In addition, there is a checkbox for
Automatic Connect. This option applies to USB connection only. If this checkbox is checked,
when the USB cable is connected, the VX6 will automatically try to start ActiveSync over the
USB port. Note that this interferes with processes on the configured port at the same time.
Please refer to the "Backup VX6 Files" section later in this chapter for parameter setting
recommendations.
E-EQ-VX6RG-F
Start | Settings | Control Panel | PC Connection
Factory Default Settings
Allow Connection Enabled
Connect Using 'USB Client'
Figure 3-23 Communication / PC Connection Tab
107
VX6 Reference Guide