Validating The Server Certificate - Honeywell VX6 Reference Manual

Cisco Radio

Validating the Server Certificate

Before validating the server certificate, make sure the Root CA certificate is installed on the VX6.
Navigate to the Wireless Network Properties configuration screen.
Click the Properties button.
Check the Validate server box as shown below.
Click OK to dismiss the configuration boxes.
Once the authentication completes the status changes to show the VX6 has authenticated to
<SSID> as shown above.
E-EQ-VX6RG-F
Figure 5-71 Validate Server
Figure 5-72 SSID Authenticated
243
VX6 Reference Guide