Setting Doorphone Parameters; Basic Parameters - Alphatech Slim IPDP – 01 Installation And Operating Instructions Manual

Doorphone voip

Hide thumbs Also See for Slim IPDP – 01:

Table of Contents

3.2 Setting DoorPhone parameters

After making changes use the save changes button.

1. Mode of DoorPhone choice selects number per Day/Night DoorPhone

mode or selects numbers of the first and second groups.

2. Sign for call extension * or # (10sec before call end the DoorPhone will send

a notice, then the call may be extended)

3. Two commands in order to hang up the DoorPhone using both switches

[1 or 2 digits]. The advantage is to set the same command both for switch

closing and command to guard hanging up (page 35). Single digit command

is entered as the first character to replace with "star" *. For example, 2-digit

code to shorten it to 55 single-typing * 5 The command is then evaluated

with only one pressing 5 on the phone.

4. Command for DAY / NIGHT mode switching

Note: The switchover to Day/Night mode remains set in IPDP even after

power supply disconnection.

Single digit command is entered as the first character to replace with

"star" *. For example, 2-digit code to shorten it to 11 single-typing * 1 The

command is then evaluated with only one pressing 1 on the phone.

5. Automatic or manual switching Day - Night mode. Automatic switch setting

in "Day interface".

6. hasn't in this design sense, because isn't possible to connect keyboard

IPDP - installation and operating instructions

Table of Contents

Do you have a question about the Slim IPDP – 01 and is the answer not in the manual?