Table of Contents
Advertisement
DIP switch setting basic operation and
default
setting. See on picture 6.
State of DIP switch is reading at start the IPDP, i. e.
after reset. After get started system is necessary DIP
switch 3 and 4 always return to the position "On",
because at next reboot system would be new values
overwriting by default value.
Picture 6 DIP switch settings
1.5 Installation of DoorPhone VoIP Assembly
1.5.1 Open and close the cover of Slim IPDP
12
IPDP - installation and operating instructions
Advertisement
Table of Contents
Need help?
Do you have a question about the Slim IPDP – 01 and is the answer not in the manual?
Questions and answers