Table of Contents
Advertisement
3.1.8 Day intervals
Display only if you check automatic switch Day/Night mode on Basic parameter
- page 33. Function with firmware V5.8 and higher.
After making changes use the save changes button.
1. Display actual internal time (you must setting in "Service" time server)
2. Table of time interval - interval is meaning where is day, the rest is night.
For example: interval 1 = 08:00-12:00, interval 2 = 14:00-17:00 - from
00:00 to 7:59 is night, from 8:00 to 12:00 is day, from 12:01 to 13:59 is
night, from 14:00 to 17:00 is day and from 17:01 to 23:59 is night.
3. Default value – presetings to the firm settings. After making changes use
the save changes button.
IPDP - installation and operating instructions
27
Advertisement
Table of Contents
Need help?
Do you have a question about the Slim IPDP – 01 and is the answer not in the manual?
Questions and answers