Setting Doorphone Parameters; Basic Parameters - Alphatech Fermax PBX EXP User And Installation Manual

3.2 Setting DoorPhone parameters

3.2.1 Basic Parameters

After making changes use the save changes button.
1. Mode of DoorPhone choice selects number per Day/Night DoorPhone
mode or selects numbers of the first and second groups.
2. Sign for call extension * or # (10sec before call end the DoorPhone will send
a notice, then the call may be extended)
3. Two commands in order to hang up the DoorPhone using both switches
[2 digits].The advantage is to set the same command both for switch closing
and command to guard hanging up (page 32).
4. Command for DAY / NIGHT mode switching
Note: The switchover to Day/Night mode remains set in IPDP even after
power supply disconnection.
5. Automatic or manual switching Day - Night mode. Automatic switch setting
in "Day interface".
6. Dialing as on normal telephone (all number of called person should be
pressed on keyboard). If use mode P2P then "." in IP adress is make by
push to button with "key"
Only 2-digit memory number is entered on keyboard by which the number
of called person is stored (memory number corresponds to button number
with respect to Day/Night switchover).
7. =0 only NC-module connected to the basic module
=1 not use
=2 the keyboard connected on the first position
IPDP - installation and operating instructions
31