Table of Contents
Advertisement
3.2 Setting DoorPhone parameters
3.2.1 Basic Parameters
After making changes do not forget click on „save changes" button
1. Mode of numbers dial – the numbers are dialled either up DAY/NIGHT
mode or from first or second group - explain on page Fel! Bokmärket är
inte definierat.
2. Character to prolong the communication is either * or # (10sec before
ending of communication you get notification from Door phone ( 3 beeps)
about call ending. You can prolong it by pressing * or # on your phone.)
3. Code to hang up the door phone by phone [2 digits]. It is useful to
programm the same code for relay activation as same as code for hanging
up the door phone. (page 34).
4. Code for switching DAY / NIGHT mode
Note: Switching to Day/Night mode stays in IPDP even after power supply
disconnection.
5. DAY/NIGHT switching is done manually ( codes using by phone) or
automatically – then is valid table of Daily intervals and must be programm
time server NTP in menu "Service"
6. designed for modular IPDP so no useful for Slim version
7. designed for modular IPDP so no useful for Slim version
8. DEFAULT – factory setting. After making changes click on button „ save
changes
ATTENTION! Those parametres seriously influence Door Phone behaviour.
IPDP - installation and operating instructions
34
Advertisement
Table of Contents
Need help?
Do you have a question about the Slim IPDP – 01 and is the answer not in the manual?
Questions and answers