Table of Contents
Advertisement
MX3X-VXC Options
Access: Start > Settings > Control Panel > MX3X-VXC Options
Set options such as IP V6, time sync, touch screen enable and CapsLock. Also set Status Popup taskbar icon display options
for the Admin and User.
It may be necessary to warmboot the MX3Plus after making desired changes. A pop up window indicates if a warmboot is
required.
Note:
If there is no icon corresponding to this item in the Control Panel, contact your Honeywell Representative for upgrade
details.
Communication
Options on this tab configure communication options for the MX3Plus.
Enable TCP/IP Version 6
By default, IPv6 is disabled on the MX3Plus. Check this checkbox to enable IPv6.
Allow Remote Desktop Autologon
By default, Remote Desktop Autologon is disabled. Check this checkbox to enable Remote Desktop Autologon.
Note:
The .RDP file must be saved in the \System folder. When prompted, use the Save As button to save the .RDP file is
the \System directry. If the .RDP file is saved in the default root folder location, the .RDP file will not persist across a
warmboot.
4-100
Advertisement
Table of Contents
