Multipoint Viewing Layouts; Changing The Way Calls Are Answered; Temporarily Refusing Calls - Polycom RealPresence Group Series User Manual

User's Guide for the Polycom RealPresence Group Series and the Polycom Touch Control

Multipoint Viewing Layouts

Changing the Way Calls Are Answered

Temporarily Refusing Calls

Polycom, Inc.
What you see during a multipoint call can vary depending on how the
RealPresence Group system is configured, the number of sites participating,
the number of monitors you are using, and whether content is shared. The
multipoint viewing layout configured on the host system is the one used in the
call. To find out more about these layouts, please talk to the administrator of
your RealPresence Group system.
If you are not in an RMX call, your only layout option is Browse.
To change layouts during a multipoint call:
1 From the Call screen, touch Layout.
2 Touch one of the following:
— Browse: This option takes you back to the main video so that you can
cycle through the available layouts. The available layouts depend
upon certain factors, such as how many participants are in the call or
the content status.
— Self View: This option allows you to determine where your PIP is
displayed.
3 Touch the layout you want to use for the call.
The layout is displayed, allowing you to keep the layout or change to
another layout.
If your system administrator has allowed you access, you can automatically
refuse incoming calls if you do not wish to be disturbed. Callers get a message
that the call was rejected, and you receive no notification about incoming calls.
You can, however, make outgoing calls.
To temporarily refuse incoming calls:
1 From the Home screen, touch
2 Touch the Group Series System tab.
.
21