Customizing Your Workspace; Allowing The Far-End System To Control Your Camera; Adjusting For Room Lighting - Polycom RealPresence Group Series User Manual

User's Guide for the Polycom RealPresence Group Series and the Polycom Touch Control

Customizing Your Workspace

Allowing the Far-End System to Control Your Camera

Adjusting for Room Lighting

28
You can customize what you see on the screen, depending on how your
system is configured.
If your system administrator has allowed access to user settings, you can allow
the far-end system to control your camera. Far-end participants can also set
and use presets for your camera, if their systems support presets.
To allow the far end to control your camera:
1 From the Home screen, touch
2 Touch the RealPresence Group system tab.
3 Under Camera, touch Far Control of Near Camera to enable the option.
Changing this setting takes effect immediately, even if a call is in progress.
If your system administrator has allowed access to user settings, you can use
the backlight control to adjust the brightness of the video that the main camera
sends to the RealPresence Group system. Adjusting this setting can be helpful
when the room arrangement results in strong light coming from behind the
people in the picture.
Because backlight controls adjust the main camera, these controls do not make
content from a computer or a document camera appear brighter.
To turn backlight compensation on:
1 From the Home screen, touch
2 Touch the RealPresence Group system tab.
3 Under Camera, touch Backlight Compensation to enable the option.
.
.
Polycom, Inc.