Attachment Card Guide Assembly With The Interposer Connector - IBM V03 Maintenance Information

Attachment card guide assembly with the interposer connector

DANGER
<1-13> Do not connect or disconnect a communication port, a teleport, or any other connector during an
electrical storm.
DANGER
<1-14> Switch off printer power and unplug the printer power cord before connecting or disconnecting a
communication port, a teleport, or other attachment connector.
Attention: This is an ESD sensitive area. See Electrostatic discharge (ESD) procedures before working with
parts that are sensitive to ESD.
Chapter 5. Removals, service checks and adjustments
206