IBM V03 Maintenance Information page 79

Table 16. Error messages (continued)
Message
028 COMMUNICATIONS CHECK
CALL SYSTEM OPERATOR
(Coax interface only)
031 END OF FORMS TIMEOUT
LOAD FORMS
(Coax interface only)
031 END OF FORMS TIMEOUT
LOAD FORMS
(Coax interface only)
032 FORMS JAMMED TIMEOUT
CLEAR JAM AND RELOAD FORMS
(Coax interface only)
033 TEAR PAPER TIMEOUT
TEAR OFF AT OUTPUT AND PRESS
PARK
(Coax interface only)
Description
Poll timeout. Printer not polled in 60
seconds.
False 001 END OF FORMS condition
exceeded 60 seconds.
Forms are visible between the printhead
and the platen.
Forms path sensor cannot sense paper.
False 001 END OF FORMS condition
exceeded 60 seconds.
Forms do not load when Load/Eject is
pressed.
No forms movement.
002 FORMS JAMMED FRONT TRACTOR
or 020 FORMS JAMMED REAR
TRACTOR condition exceeded 60
seconds.
Jam detected at the front or rear tractor
jam sensor.
091 FANFOLD PARK condition exceeded
60 seconds.
Action
Check control unit.
See MAP 0121: Parallel with twinax or
coax attachments.
See MAP 0131: Paper path sensor.
See MAP 0130: No paper movement.
See MAP 0190: Form feed problems.
1. Tear off paper after exit from the
printer.
2. Press Park to allow operation to
complete.
Chapter 1. Diagnosing problems
79