Paper feed motor drive belt
Front Tractor
Connector Housing
Screws
Nut and
Screw
Perform the following procedures first:
1. Remove the Rear cover.
2. Remove the Top cover asm..
1. Remove the nut from the front tractor connector housing.
2. Remove the stop screw from the front tractor connector
housing.
3. Slide the cable and connector out of the housing.
4. Loosen the paper feed belt tension lever screws through the
access holes in the frame and remove the paper feed belt.
Note the path of the belt to aid installation.
Installation notes
1. Perform the Paper feed belt adjustment.
Chapter 5. Removals, service checks and adjustments
227