Table of Contents
Advertisement
Note:
other printers may not work with your
printer.
Warning!
memory cards are easily damaged by
static electricity. Touch something metal
on the printer before you touch a
memory card.
Connection points
Notch
24
Install memory and option cards
Installing a
memory card
Memory options designed for
Printer memory and flash
Latch
Follow the instructions in this section to
install either a printer memory card or a
flash memory card. Memory cards must
have 168-pin connectors.
The system board has three connectors
for optional memory cards. You can
install any combination of printer
memory and flash memory cards in the
connectors. However, the printer only
recognizes one flash memory card at a
time.
1
2
3
4
5
Notch
6
Remove the system board access
cover (see page 22).
Unpack the memory card.
Avoid touching the connection
points along the edge of the card.
Save the packaging.
Push open the latches on both
ends of the memory connector
you want to use.
Align the notches on the bottom of
the card with the notches on the
connector.
Push the memory card firmly into
the connector until the latches on
either end of the connector snap
into place.
It may require some force to fully
seat the card.
Make sure each latch fits over the
notch on the end of the card.
Advertisement
Table of Contents
