Map 0160: Ribbon Feed And Ribbon Lift - IBM V03 Maintenance Information

MAP 0160: Ribbon feed and ribbon lift

Symptom explanation
053 MACHINE CHECK ERR 4 0 X
089 RIBBON JAM
Ribbon Feed or Lift Failures
No visible print
Print quality problems
Table 12. MAP 0160: Ribbon feed and ribbon lift
Step Questions/Actions
The following items are possible causes for ribbon feed or lift
1.
failures:
v Ribbon installed incorrectly
v Ribbon cartridge bad
v Printhead cables not installed correctly
Repair as needed.
Does the problem still exist?
Turn on the printer.
2.
Are you here because of an 053 or an 089 display
message:
Suspected FRUs/causes
Ribbon installation
Ribbon cartridge (customer responsibility)
Ribbon drive motor
Ribbon lift motor
Printhead cables
Ribbon motion sensor (sensor cable)
Logic board
AFTA setting
Yes
Go to step 2.
Go to step 3.
No
Run T&D in automatic mode
to verify correct printer
operation (see Running the
test and diagnostic (T&D)
programs).
Go to step 4.
Chapter 1. Diagnosing problems
57