MC40 Integrator Guide
3
Press and hold the Right Scan/Action button. By default, a preview window appears on the screen. The Left and
Right LEDs light red to indicate that data capture is in process.
Figure 4-1 Data Capture with Camera
4
Move the MC40 until the bar code is centered under the red target.
The Left and Right LEDs light green, a beep sounds and the MC40 vibrates, by default, to indicate the bar code
5
was decoded successfully. The captured data appears in the text field.
4.1.2 Using the Imager
To capture bar code data:
4-2
MN000112A01 - September 2013