Alarm Input - Beward N6601 Operation User's Manual

Schedule Selection: select the list box to specify the schedule you want to set. Schedule Selection: select the list box to specify the schedule you want to set. Schedule Selection: select the list box to specify the schedule you want to set.
• • •
FTP -Alarm FTP -Alarm FTP -Alarm
• • •
FTP - Periodical FTP - Periodical FTP - Periodical
• • •
E-Mail (SMTP) -Alarm E-Mail (SMTP) -Alarm E-Mail (SMTP) -Alarm
• • •
E-Mail (SMTP) -Periodical E-Mail (SMTP) -Periodical E-Mail (SMTP) -Periodical
Mon (Monday) to Sun (Sunday): the time period on the right of the checked day is the Mon (Monday) to Sun (Sunday): the time period on the right of the checked day is the Mon (Monday) to Sun (Sunday): the time period on the right of the checked day is the
effective period of the schedule. effective period of the schedule. effective period of the schedule.
Start time, End time: specify the Start time and the End time. Start time, End time: specify the Start time and the End time. Start time, End time: specify the Start time and the End time.
Use the same time schedule every day: when this is checked, the Start time and End Use the same time schedule every day: when this is checked, the Start time and End Use the same time schedule every day: when this is checked, the Start time and End
time set to Mon (Monday) are applied to all days. In this case, the Start time and End time of the time set to Mon (Monday) are applied to all days. In this case, the Start time and End time of the time set to Mon (Monday) are applied to all days. In this case, the Start time and End time of the
other days than Mon (Monday) cannot be input. other days than Mon (Monday) cannot be input. other days than Mon (Monday) cannot be input.

8.6. Alarm input

8.6. Alarm input 8.6. Alarm input
When you click [Alarm Input] in the [Advance] menu, the Alarm input setting menu When you click [Alarm Input] in the [Advance] menu, the Alarm input setting menu When you click [Alarm Input] in the [Advance] menu, the Alarm input setting menu
appears. You can set in this menu to control the external alarm input of I/O port on the rear of the appears. You can set in this menu to control the external alarm input of I/O port on the rear of the appears. You can set in this menu to control the external alarm input of I/O port on the rear of the
device linked to FTP, SMTP and HTTP sending function (Pic. 8.14). device linked to FTP, SMTP and HTTP sending function (Pic. 8.14). device linked to FTP, SMTP and HTTP sending function (Pic. 8.14).
Sensor input 1: click it for using external sensor which is connected to sensor input1 of the Sensor input 1: click it for using external sensor which is connected to sensor input1 of the Sensor input 1: click it for using external sensor which is connected to sensor input1 of the
camera I/O port. camera I/O port. camera I/O port.
Trigger condition: select High signal output and Low signal output as alarm. Trigger condition: select High signal output and Low signal output as alarm. Trigger condition: select High signal output and Low signal output as alarm.
Camera move: pull down the window to select the camera preset position. Camera move: pull down the window to select the camera preset position. Camera move: pull down the window to select the camera preset position.
N6601 Operations User Manual N6601 Operations User Manual N6601 Operations User Manual
Pic. 8.14 Pic. 8.14 Pic. 8.14
Chapter 8. Setting-Advance menu Chapter 8. Setting-Advance menu Chapter 8. Setting-Advance menu
56 56 56