Alarm Input - Beward N6603 User Manual

 [Add] button: click this button to add a time interval, which was specified in the [Start
time] and [End time] fields, to the schedule.
 [Delete] button: removes a time interval from the schedule.
For user's convenience, the intervals appear as a scale, where blue color means that no
interval is set for this period and red color shows the specified intervals.
NOTE:
User can specify only 5 intervals for each day of the week.
Use the same time schedule every day: applies the schedule that was specified for
Monday to the whole week.
NOTE:
Click [ОК] to save the current schedule.

7.7. Alarm input

This section allows you to specify what the camera should do when the external sensor
triggers.
NOTE:
If you use external alarm devices, be aware that that the camera has logical I/O and exceeding the rated
voltage and current (max 30 W and 12 V) is PROHIBITED!
Check the box to enable alarm input.
Trigger condition: allows you to select a voltage level on the camera alarm input:
 High: if this option is selected, an alarm triggers when a 12 V power source is connected
to the input contacts, i.e. alarm triggers when voltage increases from 0 to 12 V.
 Low: if this option is selected, an alarm triggers when a 12 V power source is
disconnected from the input contacts, i.e. alarm triggers when voltage decreases from
12 to 0 V.
N6603 Operations User Manual
Chapter 7. SETTING: Advanced
73