Table of Contents
Advertisement
When selecting this type the following items are available:
Set min time interval between triggers: when this time interval ends, the alarm event can
be restarted.
Please Configure Tampering Detection: a link which allows you to open motion detection
configuration window.
11.2.1.4. Digital Input
Digital Input: the action is executed by the selected type of status changing of the digital
input (Pic. 11.32).
The following settings are available:
Set min time interval between triggers: when this time interval ends, the alarm event can
be restarted.
Only one digital input is available in this camera model. [Digital Input1] item has the
following parameters:
Active: an action executes when digital input status corresponds to the normal status.
Inactive: an action executes when digital input status is opposite to the normal status.
Change: an action executes by any changing of the digital input status.
11.2.1.5. Periodical
Periodical: the action is executed periodically according to specified time period (Pic.
11.33).
When selecting this type the following settings are available.
N300 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.31
Pic. 11.32
Pic. 11.33
89
Advertisement
Table of Contents
