Chapter 4. Installing The Camera And Connecting A Cable; Overview Of Connecting The N6603 To A Network; Connecting The Camera Using Poe Technology; Connecting The Camera Via Power Connector - Beward N6603 User Manual

Chapter 4. Installing the Camera and Connecting a Cable

4.1. Overview of Connecting the N6603 to a Network

BEWARD N6603 IP camera can be powered over a twisted pair cable thanks to support for
PoE technology. Therefore, it provides two ways to deliver power to the camera:
 Over a twisted pair cable using PoE technology.
 Through the camera's power cord socket using the supplied power adapter.
IMPORTANT!
Simultaneous power supply over PoE and the camera's power cord socket is prohibited!

4.1.1. Connecting the Camera Using PoE Technology

This camera can be connected to a network using a PoE injector. The Picture 4.1 shows a
switch with PoE support. Such a switch may have standard data outputs as well as several PoE
outputs, which can be used both for data transfer and power supply.

4.1.2. Connecting the Camera via Power Connector

Connect the N6603 to an Ethernet network. Power is delivered through the power supply
that is included with this camera or similar, compatible with it.
N6603 Installation User Manual
Chapter 4. Installing the Camera and Connecting a Cable
Pic. 4.1
Pic. 4.2
11