Chapter 4. Installing The Camera And Cables' Connecting; General Information; Installation Recommendations - Beward N300 Installation & User Manual

Chapter 4. Installing the Camera and Cables' Connecting

4.1. General Information

BEWARD N300 supports wired connection only. The camera can be connected directly to a
computer or through a router.
A common home router has one WAN port for Internet access and four LAN ports to
connect computers, IP cameras and other devices on your local network.

4.2. Installation Recommendations

This section contains recommendations that should be considered when mounting and
installing the N300.
Recommendations on camera placement:
 This camera is designed for indoor video surveillance. The operating temperature range
is 0°С to +40°С.
 Avoid exposure to direct sunlight and do not locate the camera near any heat sources.
 Incorrect installation may cause undesirable "blind spots", zones that are not visible to
the camera's operator.
 Avoid exposure to high humidity.
 Do not locate the camera near any electrical appliances which can be electromagnetic
transmitters.
 When installing the camera, be convinced of possibility of free laying connecting cables.
 Avoid unstable installation, which may allow exposure to high vibration. This may reduce
motion detection performance and image crispness in whole.
N300 Installation User Manual
Chapter 4. Installing the Camera and Cables' Connecting
Pic. 4.1
9