Wireless-Client Mode - GeoVision GV-VS02 User Manual

4.7.2 Wireless-Client Mode

To use the wireless function, a wireless LAN USB adaptor is required. For supported
wireless LAN adaptors, see Appendix A.
Network type: Select the network mode Ad Hoc or Infrastructure.
Infrastructure: Via the Access Point to connect to the Internet. This mode further
gives wireless access to the Internet or data sharing under a previously wired
environment.
Ad-Hoc: A Peer-to-Peer mode. This mode connects to other computer with the
WLAN card, and does not need the Access Point to connect to each other.
Network name (SSID): The SSID (Service Set Identify) is a unique name that
identifies a particular wireless network. Type SSID of the Wireless LAN group or
Access Point you are going to connect to.
Access Point Survey: Click this button to search all the available Access Points
(Infrastructure mode) and wireless stations (AD-Hoc mode) within the range of your
WLAN card.
Authentication Type: Select one of these network authentications and data
encryptions: Disable, WEP, WPAPSK-TKIP, WPAPSK-AES, WPA2PSK-TKIP or
WPA2PSK-AES.
Disabled: No authentication is needed within the wireless network.
60
Figure 4-26