Buzzer - GeoVision GV-VS02 User Manual

4.2.4 Buzzer

Note this function is only available for GV-VS02A.
The system buzzer can be activated automatically under these conditions: video lost, input
device triggered, motion detected, disk full and disk write error. You can set the duration of
buzzing sounds to be 5 Seconds, 10 Seconds, 20 Seconds, 30 Seconds or Always. To
turn off the buzzer, select Off.
Note the buzzer only works when the GV-Video Server is monitoring. To activate the
monitoring, see 4.4 Monitoring.
44
Figure 4-14