Playback Of Daylight Saving Time Events - GeoVision GV-VS02 User Manual

5.2.4 Playback of Daylight Saving Time Events

On GV-System, you can retrieve the events recorded during the Daylight Saving Time
(DST) period from GV-Video Server for playback. You can also attach the USB mass
storage device with the recorded files to GV-System for playback.
The following instructions describe how to retrieve the recorded files from GV-Video
Server over Internet. If you like to use the USB mass storage device for playback, first
follow the instructions in 5.2.1 Playback Using USB Mass Storage Device to load the
recorded files to ViewLog, and then follow Steps 4-7 below to play back DST events.
1. The GV-Video Server must allow the remote access with ViewLog Server activated.
See 4.3.6 ViewLog Server.
2. To remotely connect to GV-Video Server from GV-System, click the Tools button and
select Remote ViewLog Service. The Connect to Remote ViewLog Service dialog
box appears.
3. Enter the connection information of the GV-Video Server, and click Connect. Once the
connection is established, the video events will be displayed on the Video Event list.
4. On the Date Tree, select the date of Daylight Saving Time. A separate DST subfolder
will be displayed as illustrated below.
Figure 5-6
5. On the Video Event list, select desired events, and click the Play button to start.
Note:
1. The playback function is only compatible with GV-System version 8.3 or later.
2. The AVI file recorded during the DST period is named with the prefix "GvDST", e.g.
GvDST20081022xxxxxxxxx.avi, to differentiate from the regular AVI file named with
the prefix "Event", e.g. Event20081022xxxxxxxxx.avi.
Recording and Playback
5
81