Wireless-Client Mode - GeoVision GV-VS04H User Manual

4.7.2 Wireless-Client Mode

To use the wireless function, a wireless LAN USB adaptor is required. For supported
wireless LAN adaptors, see Appendix B.
 Network type: Select the network mode Ad Hoc or Infrastructure

Infrastructure: Via the Access Point to connect to the Internet. This mode further
gives wireless access to the Internet or data sharing under a p
environment.

Ad-Hoc: A Peer-to-Peer mode. This mode connects to other com
WLAN card, and does not need the Access Point to connect to eac

Network name (SSID): The SSID (Service Set Identify) is a uniq
identifies a particular wireless network. Type SSID of the Wireless
Access Poin t you are connecting to.

Access Point Survey: Click this button to search all
(Infrastructure mode) and wireless stations (AD-Hoc mode) within
WLAN card.
 Authentication Type: Select one of these network authentications and data
encryptions: Disable, WEP, WPAPSK-TKIP, WPAPSK-AES, WPA2PSK-TKIP or
WPA2PSK-AES.

Disabled: No authentication is needed within the wireless network.

WEP (Wired Equivalent Privacy): A type of data encryption. Type up to four WEP
Keys in HEX or ASCII format. Note that if you use HEX format, only digits 0-9 and
letters A-F, a-f are valid.
100
Figure 4-36
.
reviously wired
puter with the
h other.
ue name that
LAN group or
the available Access Points
the range of your