Gv-Vs02A - GeoVision GV-VS02 User Manual

1.6.1.2 GV-VS02A

No. Name
1 Video Input
2 Audio Input
3 Speaker Output
4 Reset Button
5 Default Button
6 Disk Full/Fault LED
7 Ready LED
8 Power LED
1 2
Figure 1-5
Function
2 plugs for video inputs.
2 plugs for audio inputs.
A plug for the speaker device.
It reboots the GV-Video Server, and keeps all current
configurations.
It resets all configurations to their factory settings.
To use this function, follow these steps:
1. Press and then release the Reset button.
2. Press and hold the Default button until the 3 LED lights are on.
3. Release the Default button. Wait until the Disk LED is off and
Ready LED is on. You successfully return to the default settings.
This LED is on, indicating the hard drive is full or faulty.
This LED is on, indicating the GV-Video Server is ready for
connection.
This LED is on, indicating the power is supplied.
3 4 5
Introduction
1
8
7
6
5