Gps/Wiegand - GeoVision GV-VS02 User Manual

4.2.3 GPS/Wiegand

GPS Function
Note this function is only available for GV-VS02 (Hardware Version 2.0), GV-VS02A and
GV-VS12.
You can select either GPS or Wiegand function for use. The two functions cannot be
enabled at the same time.
To enable the GPS function, a GV-GPS module or any GPS module supporting UART or
RS-232 interface is required to connect to the GV-Video Server first. See Chapter 9
Auxiliary Device Connectors.
Select GPS Baudrate: Two baud rate options are available: 4800 and 9600. By
default the value is 9600.
Set GPS Update Period: Set the update frequency in seconds for GPS data.
After the GPS function is activated, you can view the location of the GV-Video Server on
Google Maps. See 6.3 GPS Tracking. If the monitoring is also activated, the GPS tracking
routes will be recorded along with videos. This makes it possible to play back tracking
routes and videos together on GV-System. See 5.2.3 Playback of GPS Tracking Routes.
42
Figure 4-12