Gv-Vs12; Pin Assignment - GeoVision GV-VS02 User Manual

9.2 GV-VS12

Owing to the model size, GV-VS12 provides the I/O Cable with RJ-45 Connector for the
extensible connection to other I/O devices and PTZ cameras. A RJ-45 connector and a
bundle of shielded wires are on the each end of the cable.
Strip the desired wires first, and connect the auxiliary devices with the right wires
according to the following pin assignment in the section 9.2.1. Then insert the RJ-45
Connector to the I/O/PTZ Port on GV-VS12 (No. 4, Figure 1-9).

9.2.1 Pin Assignment

The table below lists the pin assignment for the shielded wires of the I/O Cable with RJ-45
Connector.
Pin Wire
1 Brown
2 White with Brown Stripe
3 White with Green Stripe
4 White with Blue Stripe
5 Blue
6 Green
7 Orange
8 White with Orange Stripe
104
Figure 9-3
Function
Digital Out 1
Digital Out 2
Ground
Digital In 1
Digital In 2
Ground
RS-485 -
RS-485 +